SOLID ZIRCONIA CROWNS & BRIDGES

4Y-TZP ( 43% Translucency, 1150 MPa ).

Indications : Inlay, Onlay , Crowns, Bridges ( up to 6 units )

Contraindications: Veneer, Full Arch

Warranty : 5 years

Price/unit: 1099/-

Incisal layer 4Y-TZP (47% Translucency, 800 Mpa ), Cervical layer 4Y-TZP ( 43% Translucency, 1150 MPa ).

Indications : Veneer, Inlay, Onlay , Crowns, Bridges ( up to 6 units )

Contraindications: Full Arch

Warranty: 7 Years

Price/unit: 1999/-

Incisal layer 5Y-TZP (57% Translucency, 700 Mpa ), Cervical layer 4Y-TZP ( 47% Translucency, 1050 MPa ).

Indications : Veneer, Inlay, Onlay , Crowns, Bridges, Full arch

Contraindications: None

Warranty: 10 Years

Price/unit: 2499/-

DESIGNED AND APPROVED BY PROSTHODONTISTS

When prepping a tooth for an anterior Zirconia crown, you will need to ensure sufficient room for the wall thickness to have a minimum of 0.3 mm and ideally between 1.0 mm and 1.5 mm, or 1.8 to 2.0 mm incisal reduction.
There should be a visible and continuous circumferential chamfer with at least a 0.5 mm reduction at the gingival margin.
The horizontal and vertical preparation of the tooth should have an angle of approximately 5°, and a bevel is not advisable.
All the incisal edges should be rounded, and the lingual aspect of the anterior should be reduced with a football diamond to create a concave lingual.